Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 10GPM at 60PSI - 240ft

Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 10GPM at 60PSI - 240ft

Goulds Balanced Flow Constant Pressure System, 2HP Motor 7GPM  at 60PSI - 500ft

Goulds Balanced Flow Constant Pressure System, 2HP Motor 7GPM at 60PSI - 500ft

Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 18GPM @60PSI - 100ft

CLICK HERE TO CONFIRM THE PRICE
MSRP $3,730.00
Sale Price $2,875.00
22% OFF Factory Direct Saving
SKU#
18GP0715
In stock
Free Shipping
18GP0715
Goulds Balanced Flow Constant Pressure System

Experience the efficiency and reliability of the Goulds Balanced Flow Constant Pressure System. Designed for optimal performance, this system ensures constant water pressure with a 1.5HP motor delivering up to 18 gallons per minute at 60 PSI. Ideal for deep well applications up to 100 feet, this system is a perfect choice for both residential and commercial water supply needs.

Key Features

  • Simple, fast sizing and installation.
  • Range curves and selection charts generated from actual R&D tests.
  • Kits configured for 30 Hz minimum and 80 Hz maximum operation.
  • Wiring is as easy as standard three-wire control box: (1) L1, L2 and Ground in from power supply (2) Red, Yellow, Black and Ground out to motor.
  • Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
  • Three phase output to motor reduces wire cost.
  • Goulds model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
  • New – a Switch Input for connecting a pressure switch or float switch.
  • New – Grounding provisions for transducer and transducer cable.

Improved Transducer

  • Larger port orifice to prevent clogging
  • Case to electronics surge protection
  • All Stainless Steel construction
  • Pressure surge capability without the use of a pressure snubber
  • Case coupled noise immunity
  • Reverse voltage protection
  • Line to electronics ground surge protection on all lines
  • Transducer cable has ground wire built-in
  • Ground clamp provided for transducer to cable grounding

Specifications

  • Model #: 18GP0715
  • Motor Horsepower: 1.5
  • Phase: 3
  • Amps: 4.2
  • Flow Rate: 18 GPM
  • Warranty: 3 Year Limited
  • Wire Count: 3 Wire
  • Well Depth: 100 ft
  • Shipping Weight: 56 lbs
  • Universal Product Code: 69766653416

Shipping

Enjoy the convenience of free shipping on this product.

Performance Chart

Goulds Balanced Flow Constant Pressure System model 18GP0715 is a ProPak kit with a 1.5 HP, 230 V three-phase CentriPro motor, Aquavar SOLO controller with transducer, and Goulds 18GS07 GS water end. This system is rated for 18 GPM at 60 PSI and well depths up to 100 ft. It is designed to provide consistent water pressure, uses a small inline pressure tank, and features a wall-mounted NEMA 3 controller that can be mounted outside.

More Information
Phase3
Wire Count3 Wire
Motor Horsepower1.5
Flow Rate18
Stages 6
Well Depth100
Sourcehttps://www.xylem.com/
Model #18GP0715
ManufacturerGoulds
Shipping Weight56
Warranty3 Year Limited
Write Your Own Review
You're reviewing:Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 18GPM @60PSI - 100ft
Your Rating
Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 18GPM @60PSI - 100ft
What is included in this ProPak kit?
It includes a 1.5 HP, 230 V CentriPro three-phase motor, an Aquavar SOLO controller with transducer, and a Goulds 18GS07 GS water end pump.
What flow rate is this system rated for?
This system is rated for 18 GPM at 60 PSI.
What well depth is this model designed for?
It is listed for well depths up to 100 ft.
Is a large pressure tank required?
No. The product description states that only a small inline pressure tank is needed.
Can the pressure setting be adjusted?
Yes. The pressure is factory preset at 50 PSI and can be adjusted in the field.
Can the controller be mounted outside?
Yes. The wall-mounted controller is described as NEMA 3 rated and can be mounted outside.
What power and phase are listed for this system?
The motor is listed as 230 V and three phase.
What wiring is described for the system?
The listed wiring is L1, L2, and Ground in from the power supply, with Red, Yellow, Black, and Ground out to the motor.

Installation Brief

This constant pressure system is supplied as a ProPak kit with motor, controller with transducer, and pump water end.

  1. Review the included motor, controller with transducer, and pump components before installation.
  2. Mount the wall controller in an appropriate location; the product information states the NEMA 3 controller can be mounted outside.
  3. Connect L1, L2, and Ground from the power supply to the controller as listed in the product information.
  4. Connect Red, Yellow, Black, and Ground from the controller to the motor.
  5. Confirm the factory preset pressure setting and adjust in the field if required.
Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 18GPM @60PSI - 100ftGoulds Balanced Flow Constant Pressure System, 1.5HP Motor 18GPM @60PSI - 100ft