Goulds GS Stainless Steel Series, 4", 2 Wire, 5GPM, 1/2HP, 230V, Submersible Pump

These high quality, below ground submersible pumps are designed for residential and small municipal water supply as well as light irrigation applications. They are constructed with a cast 303 stainless steel discharge head and motor adapter, superior sand handling capability, built-in stainless steel check valve, and a Centripro motor designed for continuous operation.

GS Stainless Steel Series, 4", 2 Wire, 5GPM, 1/2HP, 230V, Submersible Pump more photos
Model # 5GS05422C
Motor Horsepower .5 HP
Phase 1 Phase
Voltage 230 V
Amps 4.0
Wire Configuration 2 Wire
Flow Rate 5 GPM
Size 4 inch Diameter
Material Stainless Steel
Warranty 5 Year Limited Warranty
Weight 35 lbs. (Shipping Weight)
UPC 69766645117
Price: $567.00


In Stock
Free Shipping ~ Continental US Only
Features & Accessories Additional Information Performance Charts Poly Pipe Wire Literature

Powered for Continuous Operation:
All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.
Field Serviceable:
Units have left hand threads and are field serviceable with common tools and readily available repair parts.
Sand Handling Design:
Our face clearance, floating impeller stack has proven itself for over 40 years as a superior sand handling, durable pump design.
FDA Compliant Non-Metallic Parts:
Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.
Discharge Head/Check Valve:
Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.
Motor Adapter:
Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.
Stainless Steel Casing:
Polished stainless steel is strong and corrosion resistant.
Hex Shaft Design:
Six sided shafts for positive impeller drive.
Engineered Polymer Bearings:
The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance.

Important: Any well with a high static water level may allow the pump to operate off the curve and outside its recommended range. We recommend using a "Dole" flow restriction valve to throttle the pump to prevent upthrust damage to the pump and motor. The maximum flow must be restricted to within the pumps recommended operating range.

Accessories

Symcom Pump Saver Plus Pump Protector for 230V, 1/3 HP to 1.5 HP Submersible Pumps, with Enclosure
Symcom Pump Saver Plus Pump Protector for 230V, 1/3 HP to 1.5 HP Submersible Pumps, with Enclosure
Model: 233P-1.5-ENCL

The Model 233-P single-phase Pump Saver Plus is a pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle and overvoltage and undervoltage conditions. The Pump Saver Plus Model 233-P protects 230 volt, 2 or 3 wire, 1/3 to 1.5 hp pumps.

read more

Price: $180.00
Add  To Cart
* FREE Shipping!
Coyote Basic Pump Protector for any Single Phase, 230V, 1/3HP to 2HP Motors
Coyote Basic Pump Protector for any Single Phase, 230V, 1/3HP to 2HP Motors
Model: coyote-1PH230V
Basic coyotes protect pumps and motors from running dry and from low voltage.  They trip in a fraction of a second on sensing a lack of fluid and restart the pump at any interval dialed on the timer from 5 minutes to 5 hours.  Sensitivity to running dry is adjustable and set at installatio ... read more
Price: $316.00
Add  To Cart
* FREE Shipping!
Coyote Super Pump Protector for any Single Phase, 230V, 1/3HP to 2HP Motors
Coyote Super Pump Protector for any Single Phase, 230V, 1/3HP to 2HP Motors
Model: coyote-1PH230V-Super
Super coyotes protect pumps and motors from running dry, low and high voltage, rapid cycling, and excessive current draw.  They trip in a fraction of a second on sensing a lack of fluid, and restart the pump at any interval dialed on the timer from 1 minute to 12 hours.  Sensitivity to run ... read more
Price: $468.00
Add  To Cart
* FREE Shipping!
7.0 GPM Dole Flow Regulator
7.0 GPM Dole Flow Regulator
Model: GX-7.0
The Dole® Flow Regulator is self-cleaning and designed to deliver a constant volume of water flow over a wide pressure drop range. The controlling mechanism is a flexible orifice that varies its effective area inversely with applied pressure so that a constant flow rate is maintained.
Flo ... read more
Price: $46.00
Add  To Cart
* FREE Shipping!
304 Stainless Steel Male Adapter, 1" MPT x 1" Barb
304 Stainless Steel Male Adapter, 1" MPT x 1" Barb
Model: SS-MA-100
Price: $11.82
Add  To Cart
304 Stainless Steel Male Adapter, 1.25" MPT x 1" Barb
304 Stainless Steel Male Adapter, 1.25" MPT x 1" Barb
Model: SS-MA-125-100
Price: $12.54
Add  To Cart
304 Stainless Steel Male Adapter, 1.25" MPT x 1.25" Barb
304 Stainless Steel Male Adapter, 1.25" MPT x 1.25" Barb
Model: SS-MA-125
Price: $13.18
Add  To Cart
304 Stainless Steel Check Valve 1"
304 Stainless Steel Check Valve 1"
Model: 17CVSS-100
Price: $30.26
Add  To Cart
304 Stainless Steel Check Valve 1 1/4"
304 Stainless Steel Check Valve 1 1/4"
Model: 17CVSS-125
Price: $40.34
Add  To Cart
304 Stainless Steel Pitless Adapter - 1"
304 Stainless Steel Pitless Adapter - 1"
Model: P-100-SS
This 1" #304 Stainless Steel Pitless Adapter has a large gasket for more efficient sealing on the well casing, and also uses a chamfered slide for easy installation.
Price: $85.00
Add  To Cart
304 Stainless Steel Pitless Adapter - 1 1/4"
304 Stainless Steel Pitless Adapter - 1 1/4"
Model: P-125-SS
This 1.25" #304 Stainless Steel Pitless Adapter has a large gasket for more efficient sealing on the casing, and also uses a chamfered slide for easy installation.
Price: $118.00
Add  To Cart
304 Stainless Steel Pressure Gauge - 2" Diameter
304 Stainless Steel Pressure Gauge - 2" Diameter
Model: PGS-100-G
Price: $22.25
Add  To Cart
No Lead Brass Male Adapter, 1" MPT x 1" Barb
No Lead Brass Male Adapter, 1" MPT x 1" Barb
Model: NL-B-1-M-1-Barb
Price: $10.60
Add  To Cart
No Lead Brass Male Adapter, 1.25" MPT x 1" Barb
No Lead Brass Male Adapter, 1.25" MPT x 1" Barb
Model: NL-B-1.25-M-1-Barb
Price: $10.00
Add  To Cart
No Lead Brass Male Adapter, 1.25" MPT x 1.25" Barb
No Lead Brass Male Adapter, 1.25" MPT x 1.25" Barb
Model: NL-B-1.25-M-1.25-Barb
Price: $11.30
Add  To Cart
No Lead Brass Check Valve 1 1/4"
No Lead Brass Check Valve 1 1/4"
Model: NL-B-CV-1.25
Price: $27.78
Add  To Cart
No Lead Brass Pitless Adapter - 1"
No Lead Brass Pitless Adapter - 1"
Model: NL-B-Pit-Adp-1
Price: $65.00
Add  To Cart
No Lead Brass Pitless Adapter - 1 1/4"
No Lead Brass Pitless Adapter - 1 1/4"
Model: NL-B-Pit-Adp-1.25
Price: $95.90
Add  To Cart
No Lead Brass Pressure Gauge, 1/4" MPT, 100PSI Max.
No Lead Brass Pressure Gauge, 1/4" MPT, 100PSI Max.
Model: Brass-PG-NL
No Lead Brass Pressure Gauge, 1/4" MPT, 100PSI Max.
Price: $5.00
Add  To Cart
Pressure Switch, 1/4" FIPT 30/50 psi
Square-D Pressure Switch, 1/4" FIPT 30/50 psi
Model: 9013FSG2J21
The industry standard for controlling electrically driven water pumps.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure.  (28 PSI)
Price: $15.50
Add  To Cart
Pressure Switch 30/50 with <strong>Low Pressure Shut-off</strong>
Square-D Pressure Switch 30/50 with Low Pressure Shut-off
Model: 9013FSG2J21M4
The industry standard for controlling electrically driven water pumps.  Low Pressure Shut-Off operates at approximately 10 PSIG below cut-in and will turn off the pump.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure.  (28 PSI)
Price: $21.50
Add  To Cart
Pressure Switch, 1/4" FIPT, 40/60 PSI
Square-D Pressure Switch, 1/4" FIPT, 40/60 PSI
Model: 9013FSG2J24
The industry standard for controlling electrically driven water pumps.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure.  (38 PSI)
Price: $15.50
Add  To Cart
Pressure Switch 40/60 with <strong>Low Pressure Shut-off</strong>
Square-D Pressure Switch 40/60 with Low Pressure Shut-off
Model: 9013FSG2J24M4
The industry standard for controlling electrically driven water pumps.  Low Pressure Shut-Off operates at approximately 10 PSIG below cut-in and will turn off the pump.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure.  (38 PSI)
Price: $21.50
Add  To Cart
6" Cast Iron Well Cap
6" Cast Iron Well Cap
Model: 6in-well-cap
6" Cast Iron Well Cap
Price: $16.26
Add  To Cart
6" Cast Iron Watertight Vermin Proof Well Cap
Campbell Manufacturing 6" Cast Iron Watertight Vermin Proof Well Cap
Model: WTC6G
6" Cast Iron Watertight Vermin Proof Well Cap.
Price: $32.00
Add  To Cart
6" x 1" ABS Single Hole Submersible Well Seal with Cable Seal
6" x 1" ABS Single Hole Submersible Well Seal with Cable Seal
Model: SWS6010
The Well Seal prevents surface water from entering the well. 

Designed for 6" Well Casing
1" Single Hole Drop Pipe
Price: $22.00
Add  To Cart
6" x 1 1/4" ABS Single Hole Submersible Well Seal with Cable Seal
6" x 1 1/4" ABS Single Hole Submersible Well Seal with Cable Seal
Model: SWS60125
The Well Seal prevents surface water from entering the well. 

Designed for 6" Well Casing
1 1/4" Single Hole Drop Pipe
Price: $26.00
Add  To Cart
Torque Arrest for 4" to 8" Wells
Torque Arrest for 4" to 8" Wells
Model: torque-arrestor
The torque arrestor is used to prevent motor start up torque from thrusting the pump against the side of the well casing. Think of it as a shock absorber for your well system.

Placement: The first torque arrestor should be placed 1' or 2' above the pump. Then ... read more
Price: $8.50
Add  To Cart
Snap-in Cable Guide for 1" poly pipe
Snap-in Cable Guide for 1" poly pipe
Model: WG6
A low priced guide with a snap-in feature for installing the pump cable. Fits 6" wells, tabs can be cut for 4" to 5".  For 1" Poly Pipe.  It is recommended to install for every 25 feet of wire.
Price: $1.95
Add  To Cart
Snap-In Cable Guide for 1.25" poly pipe
Snap-In Cable Guide for 1.25" poly pipe
Model: WG8
A low priced guide with a snap-in feature for installing the pump cable. Fits 6" wells, tabs can be cut for 4" to 5".  For 1 1/4" Poly Pipe.  It is recommended to install for every 25 feet of wire.
Price: $2.55
Add  To Cart
Clear Heat Shrink Splice Kit for 10, 12, or 14 Gauge Wire- 3 Connector
Clear Heat Shrink Splice Kit for 10, 12, or 14 Gauge Wire- 3 Connector
Model: LSK3-C
Professionally and securely seal your 10, 12, or 14 gauge well wire connection splices.
3 crimps and 3 shrink tubes included.  Perfect for 2 wire pumps plus the ground wire.
Price: $4.00
Add  To Cart
* FREE Shipping!
IDEAL Stainless Steel Hose Clamps for 1" Poly Pipe - Box of 10
IDEAL Stainless Steel Hose Clamps for 1" Poly Pipe - Box of 10
Model: 1in-hose-clamp-10pk
Ideal Tridon Hi-Gear® Stainless Steel Hose Clamps for 1" Poly pipe. 

Fits pipe: 11/16" - 1-1/2" Max. Outside Diameter
9/16" Wide Band
Price: $8.50
Add  To Cart
IDEAL Stainless Steel Hose Clamps for 1.25" Poly Pipe - Box of 10
IDEAL Stainless Steel Hose Clamps for 1.25" Poly Pipe - Box of 10
Model: 1.25in-hose-clamp-10pk
Ideal Tridon Hi-Gear® Stainless Steel Hose Clamps for 1.25" Poly pipe. 

Fits pipe: 3/4" - 1-3/4" Max. Diameter
9/16" Wide Band
Price: $9.65
Add  To Cart
Electrical Tape - 3/4" x 60'
Electrical Tape - 3/4" x 60'
Model: electrical-tape
Cold resistant, flame retardant, electrical tape. 
3/4" x 60' , UL Listed.
Price: $0.85
Add  To Cart
Pump Screen for submersible pump protection for 1" well pipe
Campbell Manufacturing Pump Screen for submersible pump protection for 1" well pipe
Model: campbell-pump-screen-SPS4X60X010

A Pump Screen provides full protection from Sand and other debris that may be in a traditional well. The Pump screen is a must when setting pumps into ponds, lakes or streams.  This protects the pump from moving objects and allows only water to enter the pump chamber.

Price: $134.00
Add  To Cart
* FREE Shipping!
CSV1A, 15-150 PSI, 1-25 GPM, Adjustable, Stainless Steel
Cycle Stop Valves CSV1A, 15-150 PSI, 1-25 GPM, Adjustable, Stainless Steel
Model: CSV1A
The Cycle Stop Valve model CSV1A is a pump control valve that automatically adjust pump output to match variable flow requirements. Downstream of the CSV1A pressure remains constant as long as demand is between the upper and lower limits of the valve. The 1" CSV1A handle from 1-25 GPM.
< ... read more
Price: $179.00
Add  To Cart
* FREE Shipping!
Aquavar SOLO™ 1AS15 Constant Pressure Controller - 1/2 to 2HP - 2 & 3-Wire - Single Phase - 230V
Goulds Aquavar SOLO™ 1AS15 Constant Pressure Controller - 1/2 to 2HP - 2 & 3-Wire - Single Phase - 230V
Model: Goulds-1AS15
The Aquavar Solo is a variable speed, constant pressure controller designed for submersible well pumps. The controller monitors pressure and adjusts pump speed to maintain a constant pressure.
  • Single phase input: 230V
  • Single phase output: 1/2 - 2 HP motors
  • Works wit ... read more
Price: $886.00
Add  To Cart
* FREE Shipping!
Single Phase Lightning Arrestors - 120V or 240V
Merrill Single Phase Lightning Arrestors - 120V or 240V
Model: LAHD550
TO BE USED WITH 120 VOLT OR 240 VOLT SINGLE PHASE POWER
 
Purpose
The lightning arrestor is designed to protect motors and controls from voltage surges caused by lightning, switching loads, or power line interferences. Surges of 500 volts o ... read more
Price: $27.00
Add  To Cart
* FREE Shipping!
To the top of the page