|
Symcom Pump Saver Plus Pump Protector for 230V, 1/3 HP to 1.5 HP Submersible Pumps, with Enclosure
Model: 233P-1.5-ENCL
The Model 233-P single-phase Pump Saver Plus is a pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle and overvoltage and undervoltage conditions. The Pump Saver Plus Model 233-P protects 230 volt, 2 or 3 wire, 1/3 to 1.5 hp pumps. A ... read more |
Price: $155.00
Include
when you add to cart
* Shipping Included!
|
|
Clear Heavy-Duty Heat Shrink Splice Kit
Model: shrink-wrap-kit
Professionally and securely seal your well wire connection splices.
|
Price: $4.00
Include
when you add to cart
|
|
Torque Arrest for 4" to 8" Wells
Model: torque-arrestor
The torque arrestor is used to prevent motor start up torque from thrusting the pump against the side of the well casing. Think of it as a shock absorber for your well system.
|
Price: $8.50
Include
when you add to cart
|
|
Snap-in Cable Guide for 1" poly pipe
Model: WG6
A low priced guide with a snap-in feature for installing the pump cable. Fits 6" wells, tabs can be cut for 4" to 5". For 1" Poly Pipe. It is recommended to install for every 25 feet of wire.
|
Price: $1.95
Include
when you add to cart
|
|
Square-D Pressure Switch, 1/4" FIPT 20/40 psi
Model: FSG-2 20/40
The industry standard for controlling electrically driven water pumps.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure. (18 PSI)
|
Price: $16.25
Include
when you add to cart
|
|
Square-D Pressure Switch, 1/4" FIPT 30/50 psi
Model: FSG-2 30/50
The industry standard for controlling electrically driven water pumps.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure. (28 PSI)
|
Price: $15.50
Include
when you add to cart
|
|
Square-D Pressure Switch 30/50 with Low Pressure Shut-off
Model: 9013FSG2J21M4
The industry standard for controlling electrically driven water pumps. Low Pressure Shut-Off operates at approximately 10 PSIG below cut-in and will turn off the pump.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure. (28 PSI)
|
Price: $19.50
Include
when you add to cart
|
|
Square-D Pressure Switch, 1/4" FIPT, 40/60 PSI
Model: FSG-2 40/60
The industry standard for controlling electrically driven water pumps.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure. (38 PSI)
|
Price: $15.50
Include
when you add to cart
|
|
Square-D High Pressure Switch Type-G 50/70 PSI
Model: 9013GSG2J33
Type-G 50/70 PSI Heavy Duty, High Pressure Switch Controls electrically driven water pumps and air compressors.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure. (48 PSI)
|
Price: $61.20
Include
when you add to cart
|
|
Square-D High Pressure Switch Type-G 60/80 PSI
Model: 9013GSG2J25
Type-G 60/80 PSI High Pressure Switch Controls electrically driven water pumps and air compressors.
For optimal efficiency, set your pressure tank air charge 2 PSI below the cut-in pressure. (58 PSI)
|
Price: $61.20
Include
when you add to cart
|
|
6" Single Hole Submersible Well Seals with Cable Seal
Model: SWS6010
The Well Seal prevents surface water from entering the well.
|
Price: $26.00
Include
when you add to cart
|
|
Campbell Manufacturing 6" Cast Iron Watertight Well Cap
Model: WTC6G
6" Cast Iron Watertight Well Cap.
|
Price: $32.00
Include
when you add to cart
|
|
6" Cast Iron Well Cap
Model: 6in-well-cap
6" Cast Iron Well Cap
|
Price: $16.26
Include
when you add to cart
|
|
Campbell Manufacturing Standard Pressure Gauge
Model: campbell-pressure-gauge
Standard Pressure Gauge with a Range 0-100psi and 1/4" NPT
|
Price: $4.50
Include
when you add to cart
|
|
Campbell Manufacturing 1" Pitless Adapter
Model: JRS-10
Pitless adapters are underground discharge units that mount into the water well casing down below the frost level. The piece that goes through the well casing secures with a rubber washer and nut on the outside of the casing. The inside of that unit is a receiver for the piece that comes up from you ... read more |
Price: $39.50
Include
when you add to cart
|
|
1" Check Valve
Model: 1in-check-valve
1" Check Valve
|
Price: $19.95
Include
when you add to cart
|
|
1/2" Pressure Relief Valve
Model: .5-pressure-relief
1/2" Pressure Relief Valve, protects against excessive pressure, preset at 100psi
|
Price: $9.25
Include
when you add to cart
|
|
3/4" Pressure Relief Valve
Model: .75-pressure-relief
3/4" Pressure Relief Valve, protects against excessive pressure, preset at 100psi.
|
Price: $10.25
Include
when you add to cart
|
|
1" Male x 1" Barb Brass Insert Fitting
Model: 1in-Male-1in-Barb
|
Price: $8.00
Include
when you add to cart
|
|
1 1/4" Male x 1" Barb Brass Insert Fitting
Model: 1.25in-Male-1in-Barb
|
Price: $10.00
Include
when you add to cart
|
|
1 1/4" Male x 1 1/4" Barb Brass Insert Fitting
Model: 1.25in-Male-1.25in-Barb
|
Price: $10.90
Include
when you add to cart
|
|
1" Barb x 1" Barb Brass Insert Fitting
Model: 1in-barb-barb
|
Price: $8.50
Include
when you add to cart
|
|
1 1/4" Barb x 1 1/4" Barb Brass Insert Fitting
Model: 1.25in-barb-barb
|
Price: $14.00
Include
when you add to cart
|
|
1" Barb x 1" Barb 90 Degree Brass Insert Fitting
Model: RBDE-1x1-90
|
Price: $9.50
Include
when you add to cart
|
|
1" Barb x 3/4" Male 90 Degree Brass Insert Fitting
Model: RBHE-1x.75-90
|
Price: $9.50
Include
when you add to cart
|
|
1" Barb x 1" Male 90 Degree Brass Insert Fitting
Model: RBHE-1x1-90
|
Price: $10.50
Include
when you add to cart
|
|
1" X 1" Threaded Brass Tee
Model: 1x1-brass-tee
|
Price: $11.50
Include
when you add to cart
|
|
Electrical Tape - 3/4" x 60'
Model: electrical-tape
Cold resistant, flame retardant, electrical tape.
3/4" x 60' , UL Listed.
|
Price: $0.85
Include
when you add to cart
|
|
Stainless Steel Hose Clamps for 1" Poly Pipe - Box of 10
Model: 1in-hose-clamp-10pk
Ideal Stainless Steel Hose Clamps for 1" Poly pipe.
Fits pipe: 1/2" - 1" Diameter
|
Price: $8.50
Include
when you add to cart
|
|
Lakos Submersible Pump Protection Separator, 5 - 12 GPM
Model: SUB-12-5-K
Defend your submersible pump and water system from the abrasive, damaging and costly effects of sand with a Lakos SUB-K Pump Protection Separator. Using controlled centrifugal action, troublesome sand is removed from the water before it enters the pump, reducing wear to impellers and other vital com ... read more |
Price: $384.00
Include
when you add to cart
* Shipping Included!
|
|
Lakos Submersible Pump Protection Separator, 10 - 16 GPM
Model: SUB-16-5-K
Defend your submersible pump and water system from the abrasive, damaging and costly effects of sand with a Lakos SUB-K Pump Protection Separator. Using controlled centrifugal action, troublesome sand is removed from the water before it enters the pump, reducing wear to impellers and other vital com ... read more |
Price: $394.00
Include
when you add to cart
* Shipping Included!
|
|
Lakos Submersible Pump Protection Separator, 14 - 28 GPM
Model: SUB-28-5-K
Defend your submersible pump and water system from the abrasive, damaging and costly effects of sand with a Lakos SUB-K Pump Protection Separator. Using controlled centrifugal action, troublesome sand is removed from the water before it enters the pump, reducing wear to impellers and other vital com ... read more |
Price: $414.00
Include
when you add to cart
* Shipping Included!
|
|
Campbell Manufacturing Pump Screen for submersible pump protection
Model: campbell-pump-screen
A Pump Screen provides full protection from Sand and other debris that may be in a traditional well. The Pump screen is a must when setting pumps into ponds, lakes or streams. This protects the pump from moving objects and allows only water to enter the pump chamber.
|
Price: $134.00
Include
when you add to cart
* Shipping Included!
|
