Home > Jet Pumps from Goulds & Pedrollo > PluriJet Multi-Stage Self-Priming Centrifugal Pump (230V, 1 1/2HP, 1PH) X

Pedrollo PluriJet Multi-Stage Self-Priming Centrifugal Pump (230V, 1 1/2HP, 1PH)

This pump is recommended for clean water and liquids that are chemically non aggressive to materials from which the pump is made.  PluriJet self-priming pumps are designed for lifting water, even in  cases with entrained air.  Their quiet running, reliability and low power consumption makes them particularly suitable for domestic and civil use, including pressurization and distribution of water, irrigation, and rainwater recovery systems.

The pump must be installed in enclosed places, or at least protected against inclement weather.

 PluriJet Multi-Stage Self-Priming Centrifugal Pump (230V, 1 1/2HP, 1PH)
Don't forget your accessories below!
Model # PJ5015C16S
Motor Horsepower 1.5 HP
Phase 1 Phase
Voltage 230 V
Amps 10.5
Nose Configuration Single Nose
Material Stainless Steel
Warranty 2 Year Limited Warranty
Weight 69 lbs. (Shipping Weight)
Your Price: $613.00


In Stock
Free Shipping ~ Continental US Only

Performance Chart

To the top of the page

Poly Pipe

Submersible Poly Pipe in 1" or 1 1/4" Diameters, and PSI rating of 160PSI or 200PSI.

Submersible Poly Pipe
Choose by PSI Rating, Diameter, and Length.
160 PSI 1" Diameter
160 PSI 1 1/4" Diameter
200 PSI 1" Diameter
200 PSI 1 1/4" Diameter

Accessories

1" IPS Ball Valve
 1" IPS Ball Valve
Model: 1in-ball-valve
1" Brass Ball Valve
Price: $11.95
Include  when you add to cart
6" Cast Iron Watertight Well Cap
 Campbell Manufacturing 6" Cast Iron Watertight Well Cap
Model: WTC6G
6" Cast Iron Watertight Well Cap.
Price: $32.00
Include  when you add to cart
6" Cast Iron Well Cap
 6" Cast Iron Well Cap
Model: 6in-well-cap
6" Cast Iron Well Cap
Price: $16.26
Include  when you add to cart
6" Single Hole Submersible Well Seals with Cable Seal
 6" Single Hole Submersible Well Seals with Cable Seal
Model: SWS6010
The Well Seal prevents surface water from entering the well.
Price: $26.00
Include  when you add to cart
1" Pitless Adapter
 Campbell Manufacturing 1" Pitless Adapter
Model: JRS-10
Pitless adapters are underground discharge units that mount into the water well casing down below the frost level. The piece that goes through the well casing secures with a rubber washer and nut on the outside of the casing. The inside of that unit is a receiver for the piece that comes up from you ... read more
Price: $39.50
Include  when you add to cart
Standard Pressure Gauge
 Campbell Manufacturing Standard Pressure Gauge
Model: campbell-pressure-gauge
Standard Pressure Gauge with a Range 0-100psi and 1/4" NPT
Price: $4.50
Include  when you add to cart

Key Features

Range of Performance

Flow rate up to 52 gpm
Head up to 394 ft

Limits of Use

Manometric suction lift up to 29 ft
Liquid temperature up to + 104°F
Environment temperature up to + 104°F

Construction Characteristics

Pump Body: Stainless steel AISI 304 with threaded ports.
Impeller: technopolymer (approved for drinking water).
Motor Shaft: stainless steel EN 10088-3 - 1.4104
Mechanical Seal: ceramic - graphite - NBR.
Electric Motor: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
PLURIJETm: single-phase 115 V or 230 V - 60 Hz with capacitor and thermal overload protector.
To the top of the page
Return to product list