Goulds Balanced Flow Constant Pressure System, 2HP Motor 10GPM @60PSI - 345ft

The Gould ProPak has several advantages over a traditional submersible pump system:

  • City-like water pressure at every faucet no matter the demand
  • Lower electricity usage by 50% due to the controller converting single phase to 3 phase
  • 0-100 PSI Pressure Setting with finger controlled adjustments
  • Only a small inline pressure tank is needed, no large bulky floor stand models are required
  • Wall mounted controller saves space and is Nema 3 rated and can be mounted outside
  • Designed for continuous operation:  Ideal for larger homes, irrigation systems, tight installation clearance issues, and geothermal applications.
  • High quality Goulds GS stainless steel pump with sand and abrasion resistant design
  • Self Diagnostic Controls check for Dry Well Ground Fault, Short Circuit Disconnected Lead, High Pressure Sensor, Temperature Fault
  • Smaller gauge wire is required

Goulds ProPak Kit include:
  • CentriPro Three Phase Motor 2 HP, 230 V - M20432
  • CentriPro Balanced Flow Controller with Transducer - BF20
  • Goulds Pumps GS Water End (pump) - 10GS10 - (1 1/4" Female NPT discharge)

Balanced Flow Constant Pressure System, 2HP Motor 10GPM @60PSI - 345ft
Don't forget your accessories below!
Model # 10GP1020
Motor Horsepower 2 HP
Phase 3 Phase
Voltage 230 V
Production This pump set at 345 ft. will produce 10 GPM @ 60 PSI
Warranty 3 Year Limited Warranty
Weight 62 lbs. (Shipping Weight)
Your Price: $1,065.00


In Stock
Free Shipping ~ Continental US Only

Performance Chart

To the top of the page

Poly Pipe

Submersible Poly Pipe in 1" or 1 1/4" Diameters, and PSI rating of 160PSI or 200PSI.

Submersible Poly Pipe
Choose by PSI Rating, Diameter, and Length.

160 PSI 1" Diameter
160 PSI 1 1/4" Diameter
200 PSI 1" Diameter
200 PSI 1 1/4" Diameter

Accessories

Stainless Steel Installation Package for Constant Pressure Systems with WX-101 Pressure Tank - 10 GPM Maximum
Stainless Steel Installation Package for Constant Pressure Systems with WX-101 Pressure Tank - 10 GPM Maximum
Model: CPSS-TPAK-101
Everything you need to install your constant pressure submersible pump system.  All in Stainless Steel!

Package Contains:
(1) Amtrol Well-X-Trol WX-101 Pressure Tank
(1) 1-1/4" Manifold
(1) 3/4" Hose Bibb
(1) 3/4" Pressure Relief Va ... read more
Price: $261.50
Include  when you add to cart
* Shipping Included!
Stainless Steel Installation Package for Constant Pressure Systems with WX-102 Pressure Tank - 23 GPM Maximum
Stainless Steel Installation Package for Constant Pressure Systems with WX-102 Pressure Tank - 23 GPM Maximum
Model: CPSS-TPAK-102
Everything you need to install your constant pressure submersible pump system.  All in Stainless Steel!

Package Contains:
(1) Amtrol Well-X-Trol WX-102 Pressure Tank
(1) 1-1/4" Manifold
(1) 3/4" Hose Bibb
(1) 3/4" Pressure Relief Va ... read more
Price: $296.80
Include  when you add to cart
* Shipping Included!
Stainless Steel Installation Package for Constant Pressure Systems with WX-103 Pressure Tank - 41 GPM Maximum
Stainless Steel Installation Package for Constant Pressure Systems with WX-103 Pressure Tank - 41 GPM Maximum
Model: CPSS-TPAK-103
Everything you need to install your constant pressure submersible pump system.  All in Stainless Steel!

Package Contains:
(1) Amtrol Well-X-Trol WX-103 Pressure Tank
(1) 1-1/4" Manifold
(1) 3/4" Hose Bibb
(1) 3/4" Pressure Relief Va ... read more
Price: $357.15
Include  when you add to cart
* Shipping Included!

Key Features

  • Simple, fast sizing and installation.
  • Range curves and selection charts generated from actual R&D tests.
  • Kits configured for 30 Hz minimum and 80 Hz maximum operation.
  • Wiring is as easy as standard three-wire control box: (1) L1, L2 and Ground in from power supply (2)Red, Yellow, Black and Ground out to motor
  • Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
  • Three phase output to motor reduces wire cost.
  • Goulds model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
  • New – a Switch Input for connecting a pressure switch or float switch.
  • New – Grounding provisions for transducer and transducer cable.
    Balanced Flow Controller – NEW FEATURES:
    • New, more versatile user interface board
    • Provides switch connection for optional pressure or level switch
    • New current limit settings for all new CentriPro motors
    • Dry well sensitivity switch
    • Broken pipe protection
    • 5 or 20 PSI pressure drop restart switch
    • Transducer better protected from transient power surges
    Transducer – NEW AND IMPROVED:
    • Larger port orifice to prevent clogging
    • Case to electronics surge protection
    • All Stainless Steel construction
    • Pressure surge capability without the use of a pressure snubber
    • Case coupled noise immunity
    • Reverse voltage protection
    • Line to electronics ground surge protection on all lines
    • Transducer cable has ground wire built-in
    • Ground clamp provided for transducer to cable grounding

    Wire Sizing Chart
    Breaker Sizing Chart
    Installation, Maintenance, and Troubleshooting PDF 667KB
To the top of the page
Return to product list