Goulds Balanced Flow Constant Pressure System, 1.5HP Motor 7GPM @60PSI - 330ft

• Simple, fast sizing and installation.
• Range curves and selection charts generated from actual R&D tests.
• Kits configured for 30 Hz minimum and 80 Hz maximum operation.
• Wiring is as easy as standard three-wire control box: (1) L1, L2 and Ground in from power supply (2)Red, Yellow, Black and Ground out to motor
• Pressure is factory preset at 50 psi with simple, fast, field adjustability for higher pressures.
• Three phase output to motor reduces wire cost.
• Goulds model GS features the Guardian bearing system and field proven sand and abrasive handling floating stack design.
• New – a Switch Input for connecting a pressure switch or float switch.
• New – Grounding provisions for transducer and transducer cable.

Balanced Flow Controller – NEW FEATURES:

• New, more versatile user interface board
• Provides switch connection for optional pressure or level switch
• New current limit settings for all new CentriPro motors
• Dry well sensitivity switch
• Broken pipe protection
• 5 or 20 PSI pressure drop restart switch
• Transducer better protected from transient power surges

Transducer – NEW AND IMPROVED:

• Larger port orifice to prevent clogging
• Case to electronics surge protection
• All Stainless Steel construction
• Pressure surge capability without the use of a pressure snubber
• Case coupled noise immunity
• Reverse voltage protection
• Line to electronics ground surge protection on all lines
• Transducer cable has ground wire built-in
• Ground clamp provided for transducer to cable grounding

Accessories