Compact:
Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter.

Serviceable:

• Back pullout design allows disassembly of pump for service without disturbing piping.
• Two compartment motor for easy access to motor wiring and replaceable components.
• Nozzle clean out plug in pump case.
• Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning.
• Premium O-ring design fittings need only be hand tight to seal.

Impeller:
F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.

Diffuser (Guidevane):
Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance.

Tubing and Fittings:
F.D.A. compliant engineered plastic is corrosion and U.V. resistant.

Powered for Continuous Operation:
Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage.

Corrosion Resistant:
Electro-coated paint process is applied inside and out, then baked on.

Protected Mechanical Seal:
Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry.

Excellent Air Handling Ability:
After initial priming the pump has the ability to re-prime itself even when air gets into the system.  Pumping resumes once the water level rises above the foot valve.
 

System Components

Basic Pump Unit:
Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing.
 

Specifications

Pump:
Pipe connections: 1 1⁄4" NPT suction, 1" NPT discharge.
Pressure switch: AS4FX preset (30-50 PSI).
Motor:

• NEMA standard
• 60 Hz.
• 1⁄2 HP, 115/230 V capacitor start
• Single phase
• 3500 RPM
• Built-in overload with automatic reset
• Stainless steel shaft
• Rotation: clockwise when viewed from motor end