|
HydroTech
75GPD
Reverse Osmosis Drinking Water Systems
Smartap® High Quality Push Button Monitored Systems
| 4VTFC75G-PB |
75GPD, 4 Vessel Smartap® High Quality Push Button Monitored R.O System |
$309.00 |
The Hydrotech® Reverse Osmosis Drinking Water System combines mechanical filtration with reverse osmosis technology for effective water treatment in point-of-use applications. The system is manufactured using the finest materials available, Meeting California Prop. 65 Requirements and NSF criteria. Each system is 100% tested and sanitized in preparation for shipment.
All Hydrotech® Reverse Osmosis Drinking Water Systems are equipped with their patented Smartap® PushButton Water Quality Monitor which compares the feed water to the product water to determine membrane performance. With the touch of a button, the Smartap® Monitor reports the results by illuminating colored lights. The optional Smartap® Faucet Monitor is actuated with each draw of water from the faucet, in addition it monitors inlet valve operation.
The Hydrotech® Reverse Osmosis Drinking Water System is backed by a two year limited warranty. The Smartap® water quality monitor is backed by a five year limited warranty.
System Specifications
- Dimensions of RO (tank measured seperately): 14.5" Tall x 15" Wide x 5" Deep
- Production rate of 15 to 25 gallons-per-day
- Patented unitary manifold
- Patented flow control
- Patented Smartap® Water Quality Monitor
- 100% test and sanitized in preparation for shipment
Product Benifits:
-
Reduction of chemicals and heavy metals such as Lead, Chlorine, Barium, Copper, Floride, Chromium and Asbestos.
-
Cyst Reduction includes Cryptosporidium parnum ococystsand cysts of Giardia and Entamoeba.
-
Bottled quality water at pennies per gallon.
-
Crystal clear water.
-
Easy Installation.
This System Will Reduce the following Contaminats from your Drinking Water
CHEMICAL REDUCTION PERFORMANCE
|
Organic and Inorganic Contaminants |
Influent Average mg/L |
Effluent Average mg/L |
Rejection Average % |
Effluent Maximum mg/L |
Rejection Minimum % |
EPA Maximum Contaminant Level mg/L |
| Barium (Ba) |
10.7 |
0.15 |
99% |
0.60 |
94% |
2.0 |
| Cadmium (Cd) |
0.03 |
0.0005 |
98% |
0.00077 |
97% |
0.005 |
| Hexavalent Chromium (Cr6) |
0.15 |
0.022 |
86% |
0.049 |
67% |
0.05 |
| Trivalent Chromium (Cr3) |
0.17 |
0.02 |
88% |
0.02 |
88% |
0.05 |
| Copper (Cu) |
2.94 |
0.038 |
99% |
0.074 |
97% |
0.2 |
| Fluoride (Fl) |
8.8 |
0.28 |
97% |
0.37 |
96% |
2.0 |
| Lead (Pb) |
0.146 |
0.0011 |
99% |
0.0015 |
99% |
0.015 |
| Nitrate / Nitrite * |
7.3 |
0.685 |
87% |
0.843 |
86% |
10.0 |
| Radium 226/228 (Ra)1 |
25pCi/L |
5pCi/L |
80% |
5pCi/L |
80% |
5pCi/L |
| Selenium (Se) |
0.1112 |
0.0042 |
96% |
0.01 |
91% |
0.05 |
| *This System is acceptable for treatment of influent concentrations of no more than 27 mg/L nitrate(NO3) and 3 mg/L nitrite(NO2) in combination measured as 7.8 mg/L nitrogen and is certified for nitrate/nitrite reduction in water supplies with a pressure of 280 kPa (40 psig) or greater. |
| 1Barium used as a surrogate for Radium under NSF protocol. |
Mechanical Filtration
| Contaminant Reduction Performance |
Influent Average/ml |
Effluent Average/ml |
Rejection Average % |
Effluent Maximum/mL |
Rejection Minimum % |
NSF Requirement % Rejection/Max NTU |
| Asbestos |
671 mfp/L |
0.347 mfp/L |
99.95% |
3.7 mfp/L |
99.45% |
7 million fibers per Liter (mfp/L) |
| Cysts |
102,938 |
6.5 |
>99.99% |
56 |
99.95% |
99.95% 3-4 micron size |
| Turbidity |
19.4 NTU |
0.10 NTU |
99.5 % |
0.19 NTU |
99% |
1.0 NTU |
| Chlorine* (CL2) |
1.98 |
0.115 |
94% |
0.37 |
81% |
Class I > 75% |
| NOTE: Certified for Cyst Reduction including Cryptosporidium parvum ococysts and Cysts of Giardia and Entamoeba |
|
* System Tested and Certified by NSF International against ANSI/NSF 42 for Taste and Odor only. Capacity is equal to the total influent water volume processed in 9 months. | | 
