• Manganese Greensand is formulated from a glauconite greensand which is capable of removing iron, manganese, and hydrogen sulfide from water through oxidation and filtration.
• Manganese and soluble iron are oxidized and precipitated by contact with higher oxides of manganese on the greensand granules. The hydrogen sulfide is eliminated by oxidation to sulfate and an insoluble precipitate. Precipitates are then filtered and removed by backwashing.
• When the oxidizing capacity power of the Manganese Greensand bed is exhausted, the bed has to be regenerated with a weak potassium permanganate (KMnO4) solution thus restoring the oxidizing capacity of the bed. Two to four ounces of potassium permanganate, in solution, per/cu.ft. of Manganese Greensand is considered sufficient for normal regeneration.

Capacity/Cu.Ft.:

• Iron Alone-550 gr. (10,000 gal. of water containing 1 ppm iron/cu.ft.)
• Iron and Manganese - 400 gr. (7,000 gal. of water containing 1/2 ppm iron and 1/2 ppm manganese/cu.ft.)
• Hydrogen Sulfide - 175 gr. (3,000 gal. of water containing 1 ppm hydrogen sulfide. cu.ft.

Advantages

• Iron removal over wide ph range
• Effective removal of hydrogen sulfide in addition to iron and/or manganese.
• No harmful effects from a chlorine feed.
• Low attrition loss for long bed life

• Simple and dependable
• User friendly and easy to program
• High flow control valve is fully automatic and keeps media lofted and clean
• Non-corrosive, UV resistant Noryl valve body
• Flow rate up to 24 GPM
• Includes 3/4" or 1" by-pass valve
• Includes a five year warranty

• Structural Fibers
• Inner Shell Constructed of Polyethylene
• 150 lb. per square inch NSF pressure rating certified
• Each tank's materials have been accepted and certified by Water Quality National Sanitation foundation
• Lifetime Warrantyagainst any manufacturer's defects